english

Home

Outline

Contact

Products

ONLATOR

HI-EVAOLATOR

SQUARE MIXER

SPEOLATOR

SSS PUMP

CHEMICAL INJECTION

Recovery of solvent from washing waste liquid for painting,

Purpose

This system is a continuous fully closed (solvent and solute recovery) system for separating the solid content in powdery form from the liquid content of a treatment or waste liquid by turning the waste liquid into thin firm with a centrifugal force and vaporizing it instantlywith onepass heating. This system is particularly effective for the disposal of washing waste liquid produced in the painting line of automobiles and demonstrates a great effect for prevention of bad smell, improvement of solvent recovery ratio, reduction of volume of waste liquid residue, etc., remarkably improving the work efficiency.

FEATURES
HI-EVAOLATOR
  • The rate of concentration is large and it is a one pass system from a liquid powderizing
  • High concentration and the formation of dryness powder are possible.
  • Liquid film is thin and Liquid film is stable.
  • Since the liquid falls only by its gravity it is almost a few seconds of stay.
  • Due to short-time stay,there is little heat influence and heat separation is avoided.
  • It is applicable also to high concentration and sludge Liquid
  • The clearance between a braid tip and a cylinder side is adjusted to 1.0mm or less very small.
  • The axis of rotation is the strong centrifugal force effect by high-speed rotation.
  • A blade stands with centrifugal force, sways like a pendulum in a block, and fails to crush a block.
  • Simple and robust vertical structuve save apace for installation.

The use of Hi Eva

  • Solvent recovery, formation of paint part powder
  • It valuables-collects from sediment of tank of solvent recorery reactions, such as methanol, toluene,and ethanol.
  • DMF recovery with artiticial leather, MEK, MMA recovery
  • Separation of nesidue dye and glue of wasteliquid of dyeing
  • A concentration cake of raw sludge, and activated sludge, reduction of volume processing of exudation water
  • It is cake-ization of generating sludge at the time of kitchen
  • Concentration at processing processes, such as fish, dryness
  • Mineral salt and powderized recovery in waste fluid.
  • Waste fluid concentration recovery at the salts and others recovery processing process the waste gas washing liquid
  • Formation of PCB harmless, Salts classification
  • Separation of an impurity from recycling waste fluid and washing waste
  • Concentraition of radioactive waste fluid of nucleay (power sation)
  • Izing of liquid crystal waste fluid, solvent recovery
  • Rolling oil, factory drainage color paint waste fluid solvent recovery and reduction of volume.
  • Recycling of cutting oil and waste oil.
  • White distilled liquor, gelatin, distillation, fruit juice, etc.
Flow sheet
TIR TEMPERATURE RECORDER
VI VACUUM INDICATOR
PC STEAM PRESSURE CONTROL
PI PRESSURE GAUGE
TI THERMOMETER
VP VACUUM PUMP
VICR VACUUM INSTRUCTIONS CONTROLLER
VIC VACUUM INSTRUCTIONS REGULATION RECORDER
AV AUTOMATIC RESHUFFLING EXHAUST VALVE

UP

Copyright(C) 2005 SAKURA SEISAKUSHO, LTD. All Rights Reserved.